流水灯电路(含源程序代码)
流水灯电路(含源程序代码)

其实现程序:
#i nclude
unsigned char RunMode;
//**********************************System Fuction*************************************************
void Delay1ms(unsigned int count)
unsigned int i,j;
for(i=0;ifor(j=0;j120;j++);
unsigned char code LEDDisplayCode[] = 0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,//0~7
0x80,0x90,0x88,0x83,0xC6,0xA1,0x86,0x8E,0xFF;
void Display(unsigned char Value)
P3 = LEDDisplayCode[Value];
void LEDFlash(unsigned char Count)
unsigned char i;
bit Flag;
for(i = 0; i
Flag = !Flag;
if(Flag)
Display(RunMode);
else
Display(0x10);
Delay1ms(100);
Display(RunMode);
unsigned char GetKey(void)
unsigned char KeyTemp,CheckValue,Key = 0x00;
CheckValue = P2&0x32;
if(CheckValue==0x32)
return 0x00;
Delay1ms(10);
KeyTemp = P2&0x32;
if(KeyTemp==CheckValue)
return 0x00
if(!(CheckValue&0x02))
Key|=0x01;
if(!(CheckValue&0x10))
Key|=0x02;
if(!(CheckValue&0x20))
Key|=0x04;
return Key;
unsigned int TimerCount,SystemSpeed,SystemSpeedIndex;
void InitialTimer2(void)
T2CON = 0x00;//16 Bit Auto-Reload Mode
TH2 = RCAP2H = 0xFC; //重装值,初始值TL2 = RCAP2L = 0x18;
ET2=1;//定时器 2 中断允许
TR2 = 1;//定时器 2 启动
EA=1;
unsigned int code SpeedCode[]= 1, 2, 3, 5, 8, 10, 14, 17, 20, 30,
40, 50, 60, 70, 80, 90, 100, 120, 140, 160,
180, 200, 300, 400, 500, 600, 700, 800, 900,1000;//30
void SetSpeed(unsigned char Speed)
SystemSpeed =SpeedCode[Speed];
void LEDShow(unsigned int LEDStatus)
P1 = ~(LEDStatus&0x00FF);
P0 = ~((LEDStatus8)&0x00FF);
void InitialCPU(void)
RunMode = 0x00;
TimerCount = 0;
SystemSpeedIndex = 10;
P1 = 0x00;
P0 = 0x00;
P2 = 0xFF;
P3 = 0x00;
Delay1ms(500);
P1 = 0xFF;
P0 = 0xFF;
P2 = 0xFF;
P3 = 0xFF;
SetSpeed(SystemSpeedIndex);
Display(RunMode);
//Mode 0
unsigned int LEDIndex = 0;
bit LEDDirection = 1,LEDFlag = 1;
void Mode_0(void)
LEDShow(0x0001LEDIndex = (LEDIndex+1)%16;
//Mode 1
void Mode_1(void)
LEDShow(0x8000LEDIndex);
LEDIndex = (LEDIndex+1)%16;
//Mode 2
void Mode_2(void)
if(LEDDirection)
LEDShow(0x0001else
LEDShow(0x8000LEDIndex);
if(LEDIndex==15)
LEDDirection = !LEDDirection;
评论