工业控制 | 能源技术 | 汽车电子 | 通信网络 | 安防监控 | 智能电网 | 移动手持 | 无线技术 | 家用电器 | 数字广播 | 消费电子 | 应用软件 | 其他方案

电路设计->基础电路图->其他基础电路图->MAX3580 DVB-T Reference Design

MAX3580 DVB-T Reference Design

作者:dolphin时间:2012-07-31

MAX3580 DVB-T Reference Design

Abstract: The MAX3580 DVB-T reference design meets NorDig and MBRAI requirements. This NIM design includes the MAX3580 direct-conversion tuner and a COFDM DVB-T demodulator. A discrete, active loop-through with low power consumption and low cost is included. Figure 1. The reference design for the NorDig and MBRAI DVB-T tuner features the MAX3580.Figure 2. System block diagram. Figure 3. Data shows that there is at least 2dB margin to NorDig 1.0.2 in the VHF band.Figure 4. Here the data shows that there is 3.5dB to about 5dB margin to NorDig 1.0.2 in the UHF band.

NorDig Compliance
MBRAI Compliance
Sensitivity Details for all Modes
VHFUHF
Frequency (MHz)177.5226.5474570674770858
QPSK, 8k, CR = 1/2, GI = 1/4Sensitivity (dBm)-97.3-97.3-97.2-97.1-96.7-96.5-96.2
Max-Input (dBm) 0 0 0 0 0 0 0
QPSK, 8k, CR = 2/3, GI = 1/4Sensitivity (dBm)-95.9-95.7-95.7-95.6-95.3-94.9-94.8
QPSK, 8k, CR = 3/4, GI = 1/4Sensitivity (dBm)-94.8-94.8-94.7-94.6-94.5-94.1-94
QPSK, 8k, CR = 5/6, GI = 1/4Sensitivity (dBm)-93.8-93.7-93.6-93.6-93.3-93-92.8
QPSK, 8k, CR = 7/8, GI = 1/4Sensitivity (dBm)-93.3-93.1-93.1-92.7-92.7-92.4-92.2
16QAM, 8k, CR = 1/2, GI = 1/4Sensitivity (dBm)-91.7-91.7-91.5-91.5-91.4-90.9-90.7
16QAM, 8k, CR = 2/3, GI = 1/4Sensitivity (dBm)-89.8-89.7-89.5-89.5-89.3-88.9-88.8
16QAM, 8k, CR = 3/4, GI = 1/4Sensitivity (dBm)-88.6-88.3-88.4-88.1-88.1-87.5-87.3
16QAM, 8k, CR = 5/6, GI = 1/4Sensitivity (dBm)-87.1-87-87-86.9-86.9-86.4-86.3
16QAM, 8k, CR = 7/8, GI = 1/4Sensitivity (dBm)-86.4-85.7-86.1-85.9-85.7-85.4-85.6
64QAM, 8k, CR = 1/2, GI = 1/4Sensitivity (dBm)-87-86.9-86.9-86.6-86.7-86.2-85.9
64QAM, 8k, CR = 2/3, GI = 1/4Sensitivity (dBm)-84.1-84.1-83.8-83.8-83.7-83.3-83.2
64QAM, 8k, CR = 3/4, GI = 1/4Sensitivity (dBm)-82.5-82.2-82.3-82.4-81.8-81.5-81.4
64QAM, 8k, CR = 5/6, GI = 1/4Sensitivity (dBm)-80.9-80.9-80.7-80.7-80.4-80.2-79.8
64QAM, 8k, CR = 7/8, GI = 1/4Sensitivity (dBm)-79.9-79.7-79.5-79.5-79-78.9-78.8
Max-Input (dBm)-2-0.2 0 0 0 0 0
Test conditions for supply current measurements include 75Ω terminations on RF input and TV output, active working mode, and system tuned to channel 69 (858MHz). This DVB-T receiver reference design is NorDig 1.0.2 and MBRAI compliant. It is intended for terrestrial set-top box applications and has a NIM form factor. The reference design covers the VHF-III band (170MHz to 230MHz) and UHF band (470MHz to 870MHz) and interfaces with a socket board for testing system performance.The reference design includes:

  • A discrete LNA to realize an active loop-through. The loop-through has 14dB gain and less than 3.5dB noise figure, with 60mW of power consumption.
  • A MAX3580 fully integrated silicon tuner, which includes an LNA, RF and IF VGAs, mixer and lowpass filtering in the baseband stages. The tuner operates from a single 3.3V power supply. Only a small number of passive components are needed to form a complete DVB-T RF front-end solution.
  • A DVB-T/H-compliant demodulator that features the full DVB-T and DVB-H standards framing structure, channel coding, and demodulation.

关键词: 电子电路图 MAX3 DVB D

评论

技术专区