工业控制 | 能源技术 | 汽车电子 | 通信网络 | 安防监控 | 智能电网 | 移动手持 | 无线技术 | 家用电器 | 数字广播 | 消费电子 | 应用软件 | 其他方案

电路设计->安防电路图->报警器、警示器应用电路图->Microchip MTCH6303八吋电容触摸屏控制方案

Microchip MTCH6303八吋电容触摸屏控制方案

作者:angelazhang时间:2015-08-06

Microchip公司的MTCH6303是电容触摸屏控制器,提供多触摸协同和多手指表面手势,现代用户(UI)元件如收缩和放大,多手指滚动和划屏等嵌入设计,支持八吋电容触摸屏,主要用在传感器,工业,医疗电子,家庭和办公自动化和消费类电子产品.本文介绍了MTCH6303主要特性,框图,典型应用电路,以及MTCH6303多触摸电容触摸屏开发板DV102013主要特性和电路图.

Microchip’s MTCH6303 is an innovative turnkey projected capacitive touch controller that provides multi-touch coordinatesas well as a readymade multi-finger surface gesture suite. MTCH6303 brings modern user interface (UI) elements – such aspinch and zoom, multi-finger scrolling, and swipes – to any embedded design, with minimal host requirements.

The MTCH6303’s advanced signal processing provides noise-avoidance techniques and predictive tracking for tenfingers, typically at 100 Hz each for five touches. It also combines with Microchip’s MTCH652 High-voltage Line Driverto achieve a superior signal-to-noise ratio (SNR) for outstanding touch performance in noisy environments. These capabilities are critical in demanding environments such as industrial controls,home and office automation with security control panels, thermostat, printers and lighting controls, and variousconsumer applications including exercise equipment and audio systems.

MTCH6303主要特性:

• Multi-Touch up to Ten Touches
• Five Touches Typically at 100 Hz+ Each
• 27RX x 19TX Channels Support Approximately 8"Touch Screens (larger possible)
• Combines with MTCH652 High-Voltage Driver forSuperior Signal-to-Noise Ratio (SNR)
• Integrated Single and Multi-finger GestureRecognition Suite including Taps, Swipes,Scrolling, Pinching and Zooming
• Advanced Processing Provides Noise AvoidanceTechniques
• USB and I2C™ Communication
• Supports 3D Gestures up to 20 cm whenCombined with the MGC3130 GestIC® Controller
Power Management
Example:
• 27RX 19TX Sensor
- 27 mA full-scan rate
- 1 mA reduced-scan rate

MTCH6303应用:

• Touch screen designs and touch pads that requirecost effective, easy to integrate, fast time tomarket PCAP touch solutions
• Perfect for touch screens over displays, controlpanels, keypads and many other input devices
• Targeting the industrial, medical, home and officeautomation, and consumer markets

图1。MTCH6303框图

图2。MTCH6303典型应用电路图

MTCH6303多触摸电容触摸屏开发板

MTCH6303 Multi-touch Projected Capacitive Touch Screen Development Kit
Microchip’s Multi-touch Projected Capacitive Touch Screen Development Kit enablesthe creation of advanced touch interface solutions using MTCH6303 with up to 18Vboost via the MTCH652 device.

The MTCH6303 solution brings advanced features, including noise robustness, largersensor size support up to 8", faster scanning speeds and the ability to combine with the high-voltage driver, MTCH652, to achieve superior signal to noise ratio. Thesecapabilities enable a wider range of designs, including transparent touch screens overdisplays with advanced multi-touch gestures for a rich user interface.

MTCH6303多触摸电容触摸屏开发板DV102013包括:

• Touch screen controller board with MTCH6303 and MTCH652 high-voltage driver
• 8" indium tin oxide (ITO) projected capacitive touch screen
• Micro USB cable

Microchip’s Multi-touch Projected Capacitive Touch Screen Development Kit enables the creation of advanced touch interface solutions using MTCH6303 with up to 18V boost via the MTCH652.

The MTCH6303 solution brings advanced features including noise robustness, larger sensor size support up to 8", faster scanning speeds and the ability to combine with the high voltage driver, MTCH652, to achieve superior signal to noise ratio.  These capabilities enable a wider range of designs including transparent touch screens over displays with advanced multi-touch gestures for a rich user interface.

图3。MTCH6303多触摸电容触摸屏开发板外形图

MTCH6303多触摸电容触摸屏开发板主要特性:

Multi-Touch up to 10 touches 
5 touches typically at 100Hz+ each 
27RX x 19TX channels support, approximately 8” touch screens (larger possible)
Combines with MTCH652 high voltage driver for superior signal-to-noise ratio (SNR) 
Integrated single and multi-finger gesture recognition suite including taps, swipes, scrolling and pinching and zooming  
Advanced DSP processing provides noise avoidance techniques   
USB & I2C communication 
Supports 3D gestures up to 20cm when combined with the MGC3130 GestIC® controller 

MTCH6303多触摸电容触摸屏开发板应用:

Touch screen designs that need cost effective, easy to integrate, fast time to market PCap touch solutions 
Perfect for, touch screens over displays, control panels, keypads, and many other input devices 
Targeting the Industrial, Medical, Home & Office Automation, and Consumer markets among others

图4。MTCH6303多触摸电容触摸屏开发板电路图

图5。EpicIO 8" 触摸屏(PN:TXP080B002)外形尺寸图

40001803A.pdf
DV102013 Quick Start Guide.pdf



评论

技术专区